Car care · Elgin Auto Sales & Service Center · Elgin, IL
Memory Seats Explained
Memory seats let two drivers save their seat and mirror positions and bring them back with one button. Here is what a memory profile saves, how to set and recall one, and how to link it to a key fob, using the 2026 Ram 1500 owner's manual as the example.

The short answer
On the 2026 Ram 1500 with User Memory Settings (if equipped), place the vehicle in the ON/RUN position without starting it, adjust the driver's seat, outside mirrors, adjustable pedals (if equipped) and radio presets, then push memory button 1 or 2 within five seconds (on 3-button switches, push S first). To recall it, put the vehicle in PARK and push that memory button, or the unlock button on a linked key fob.
What a memory seat profile saves
The 2026 Ram 1500 manual says User Memory Settings let the driver save up to two different memory profiles for easy recall through a memory switch. Each profile saves the desired position settings for:
- The driver's seat position.
- Easy Entry/Exit seat operation (if equipped).
- Power adjustable pedals (if equipped).
- The side mirrors.
- A set of desired radio station presets.
The memory switch is on the front door panel next to the door handle, with two or three buttons depending on trim level. The manual notes the vehicle comes with two key fobs, and each can be linked to memory position 1 or 2.
From the 2026 Ram 1500 Owner's Manual, User Memory Settings: Description (p. 35), read November 15, 2026. Memory features differ by vehicle; check your own owner's manual.
How to set a memory seat profile
The Ram 1500 manual gives these steps. Saving a new profile erases whatever was stored on that button.
| Step | 2-button switch | 3-button switch (1, 2 and S) |
|---|---|---|
| 1 | Place the vehicle in the ON/RUN position (do not start the vehicle). | Place the vehicle in the ON/RUN position (do not start the vehicle). |
| 2 | Adjust the driver's seat, outside mirrors, adjustable pedals (if equipped) and radio station presets. | Adjust the driver's seat, outside mirrors, adjustable pedals (if equipped) and radio station presets. |
| 3 | Push the desired memory button (1 or 2) within five seconds. | Push the set (S) button, then push the desired memory button (1 or 2) within five seconds. |
From the 2026 Ram 1500 Owner's Manual, Programming The Memory Feature (pp. 35-36), read November 15, 2026.
The instrument cluster display shows which memory position has been set. The manual notes a profile can be set without the vehicle in PARK, but the vehicle must be in PARK to recall one.
How to recall your memory settings
To recall the settings for driver one or two, the Ram 1500 manual says to push the desired memory button (1 or 2), or the unlock button on the key fob linked to that memory position.
- If you try to recall a profile when the vehicle is not in PARK, a message appears in the instrument cluster display.
- To cancel a recall, push any of the memory buttons (1 or 2) while it is happening. The driver seat stops moving.
- After a canceled recall there is a one second delay before another recall can be selected.
From the 2026 Ram 1500 Owner's Manual, Memory Position Recall (p. 36), read November 15, 2026.
How to link a key fob to your memory seat
First, the Ram 1500 manual says to select the "Personal Settings Linked to Key Fob" feature through the Uconnect system. Then:
- Place the vehicle's ignition in the OFF position.
- Select the desired memory profile, 1 or 2.
- Once the profile has been recalled, push and release button 1 or 2 to match. "Memory Profile Set" (1 or 2) appears in the instrument cluster.
- Push and release the lock button on the key fob within 10 seconds.
To unlink a key fob, the manual says to push and hold memory button 1 or 2, then push the unlock button on the key fob within 10 seconds.
From the 2026 Ram 1500 Owner's Manual, Linking And Unlinking The Key Fob To Memory (p. 36), read November 15, 2026. See key fob battery low: what to do.
Easy Entry/Exit seat
Some vehicles with memory seats also have an Easy Entry/Exit feature. The Ram 1500 manual says it provides automatic driver's seat positioning to make getting in and out easier, and that how far the seat moves depends on where the seat is when you place the ignition in OFF.
For example, the manual says that when you place the ignition in OFF, the driver's seat moves about 2.4 inches (6 cm) rearward if it is 2.7 inches (6.77 cm) or more forward of the rear stop, and returns to its previous position when you place the ignition in ON/RUN. The feature is disabled when the seat is less than 0.9 inches (2.27 cm) forward of the rear stop.
Easy Entry/Exit is turned on or off through the programmable features in the Uconnect system. When it is enabled, the Easy Entry and Easy Exit positions are stored in each memory profile.
From the 2026 Ram 1500 Owner's Manual, Easy Entry/Exit Seat (p. 42), read November 15, 2026.
Need a hand?
Memory seat not saving or not moving to your position? Contact our service department or see our service specials.
Our service department at 1200 E. Chicago St. in Elgin is open Monday to Friday 8 a.m. to 5 p.m. and Saturday 8 a.m. to 4 p.m., and is closed Sunday. Get directions.
Memory seats FAQ
What are memory seats?
A feature that saves a driver's seat position, and on the 2026 Ram 1500 (if equipped) also the side mirrors, adjustable pedals (if equipped), Easy Entry/Exit (if equipped) and radio presets, so it can be recalled with one button.
How do I set my memory seat?
On the Ram 1500, with the vehicle in ON/RUN (not started), adjust everything, then push memory button 1 or 2 within five seconds. On 3-button switches, push S first, then 1 or 2.
Why will my memory seat not recall?
The Ram 1500 manual says the vehicle must be in PARK to recall a memory profile. If it is not, a message appears in the instrument cluster display.
Can my key fob set my seat?
Yes, on the Ram 1500 a key fob can be linked to profile 1 or 2 after you turn on Personal Settings Linked to Key Fob in Uconnect. Then the fob's unlock button recalls that profile (the vehicle must be in PARK).
How many drivers can memory seats store?
The Ram 1500 manual says the driver can save up to two different memory profiles.
What are your service hours?
Monday to Friday 8 a.m. to 5 p.m. and Saturday 8 a.m. to 4 p.m. We are closed Sunday.
Seat or memory settings acting up?
Visit us at 1200 E. Chicago St. in Elgin.
Sources
Memory seat information is from the 2026 Ram 1500 owner's manual, read November 15, 2026. Other vehicles differ; follow your own owner's manual. Your own vehicle's labels and owner's manual are the authority for your vehicle. Our address and service hours are from our own website, checked the same day. Photo is of our dealership.
- 2026 Ram 1500 Owner's Manual (Mopar): User Memory Settings: Description, Programming The Memory Feature, Linking And Unlinking The Key Fob To Memory, Memory Position Recall; Easy Entry/Exit Seat (PDF pp. 37-38, 44; printed pp. 35-36, 42), FCA US LLC via vehicleinfo.mopar.com, read November 15, 2026
- Service page: address and hours, Elgin Auto Sales & Service Center, read November 15, 2026